refactor(display): improve touch handling and code formatting

boards/esp32-s3-lcd-43/DisplayDriverGFX.cpp

@@ -1,8 +1,10 @@
 // boards/esp32-s3-lcd-43/DisplayDriverGFX.cpp
-#include <Arduino.h>
+#include "DisplayDriverGFX.h"
+
 #include "LovyanPins.h"
 #include "board_config.h"
-#include "DisplayDriverGFX.h"
+
+#include <Arduino.h>
 
 // ── Globals ──
 static LGFX* _gfx = nullptr;
@@ -18,9 +20,12 @@ static constexpr int DISP_H = 480;
 static void initDisplay() {
     Serial.println("LovyanGFX init...");
 
+    // Note: LovyanGFX handles I2C internally (port 1 for touch, port 0 for CH422G)
+    // No need to call Wire.begin() or Wire1.begin()
+
     _gfx = new LGFX();
     _gfx->init();
-    _gfx->setRotation(1);  // Landscape
+    _gfx->setRotation(0); // Landscape
     _gfx->fillScreen(0x000000);
 
     Serial.println("Display ready");
@@ -36,6 +41,8 @@ DisplayDriverGFX& DisplayDriverGFX::instance() {
 
 void DisplayDriverGFX::begin() {
     initDisplay();
+    // Turn on backlight immediately
+    setBacklight(true);
 }
 
 void DisplayDriverGFX::setBacklight(bool on) {
@@ -45,35 +52,30 @@ void DisplayDriverGFX::setBacklight(bool on) {
     }
 }
 
-int DisplayDriverGFX::width() {
+int DisplayDriverGFX::width() { return DISP_W; }
-    return DISP_W;
-}
 
-int DisplayDriverGFX::height() {
+int DisplayDriverGFX::height() { return DISP_H; }
-    return DISP_H;
-}
 
 // ── Touch handling ──
 
 TouchEvent DisplayDriverGFX::readTouch() {
     TouchEvent evt;
-
+    if(!_gfx)
-    if (!_gfx) return evt;
+        return evt;
 
     int32_t x, y;
-    if (_gfx->getTouch(&x, &y)) {
+    bool pressed = _gfx->getTouch(&x, &y);
-        evt.pressed = true;
+
+    // Only report NEW touches (debounce - ignore held touches)
+    evt.pressed = pressed && !_lastTouch.pressed;
+
+    if(pressed) {
         evt.x = static_cast<int>(x);
         evt.y = static_cast<int>(y);
-
-        // Track press start for hold detection
-        if (!_lastTouch.pressed) {
         _pressStartMs = millis();
-            _isHolding = false;
-        }
     }
 
-    _lastTouch = evt;
+    _lastTouch.pressed = pressed;
     return evt;
 }
 
@@ -122,7 +124,8 @@ HoldState DisplayDriverGFX::updateHold(unsigned long holdMs) {
 // ── Rendering ──
 
 void DisplayDriverGFX::render(const ScreenState& state) {
-    if (!_gfx) return;
+    if(!_gfx)
+        return;
 
     // Check if we need full redraw
     if(state.screen != _lastScreen) {
@@ -187,7 +190,8 @@ void DisplayDriverGFX::drawDashboard(const ScreenState& state) {
     _gfx->fillScreen(0x001030); // Dark blue
 
     // Header
-    _gfx->fillRect(0, 0, DISP_W, 30, 0x0220);
+    _gfx->fillRect(0, 0, DISP_W, 30, 0x1A1A); // Dark gray
+    _gfx->setFont(&fonts::Font0); // Built-in minimal font
     _gfx->setTextColor(0xFFFF);
     _gfx->setTextSize(1);
     _gfx->setCursor(5, 10);
@@ -197,7 +201,6 @@ void DisplayDriverGFX::drawDashboard(const ScreenState& state) {
     _gfx->setCursor(DISP_W - 100, 10);
     _gfx->printf("WiFi:%s", state.wifiSsid.length() > 0 ? "ON" : "OFF");
 
-
     // Tiles: 2 rows × 4 columns
     constexpr int cols = 4;
     constexpr int rows = 2;
@@ -232,11 +235,14 @@ void DisplayDriverGFX::drawDashboard(const ScreenState& state) {
 }
 
 void DisplayDriverGFX::updateHint() {
-    if (!_gfx) return;
+    if(!_gfx)
+        return;
 
     static uint32_t lastTime = 0;
     uint32_t now = millis();
-    if (now - lastTime < 50) return;
+    // Fixed: throttle to 100ms instead of 50ms
+    if(now - lastTime < 100)
+        return;
     lastTime = now;
 
     float t = (now % 2000) / 2000.0f;

boards/esp32-s3-lcd-43/esp32-s3-lcd-43.ino

@@ -2,10 +2,11 @@
 // Klubhaus Doorbell — ESP32-S3-Touch-LCD-4.3 target
 //
 
-#include <KlubhausCore.h>
+#include "DisplayDriverGFX.h"
 #include "board_config.h"
 #include "secrets.h"
-#include "DisplayDriverGFX.h"
+
+#include <KlubhausCore.h>
 
 DisplayDriverGFX gfxDriver;
 DisplayManager display(&gfxDriver);
@@ -19,14 +20,12 @@ void setup() {
     logic.finishBoot();
 }
 
-void loop() {
+// void loop() {
-    // ── State machine tick ──
+TouchEvent evt = display.readTouch();
-    logic.update();
 
-    // ── Render current screen ──
+logic.update();
 display.render(logic.getScreenState());
 
-    // ── Touch handling ──
 const ScreenState& st = logic.getScreenState();
 
 if(st.deviceState == DeviceState::ALERTING) {
@@ -37,18 +36,36 @@ void loop() {
     if(!h.active) {
         display.updateHint();
     }
-    } else {
+} else if(evt.pressed) {
-        TouchEvent evt = display.readTouch();
+    if(st.screen == ScreenID::OFF) {
-        if (evt.pressed && st.screen == ScreenID::DASHBOARD) {
+        // Tap in OFF mode → wake to DASHBOARD
+        Serial.println("[TOUCH] OFF → DASHBOARD");
+        logic.setScreen(ScreenID::DASHBOARD);
+        display.setBacklight(true);
+    } else if(st.screen == ScreenID::DASHBOARD) {
         int tile = display.dashboardTouch(evt.x, evt.y);
-            if (tile >= 0) Serial.printf("[DASH] Tile %d tapped\n", tile);
+        if(tile >= 0) {
+            Serial.printf("[DASH] Tile %d tapped\n", tile);
+            // TODO: Handle tile actions
+        }
+    } else if(st.screen == ScreenID::ALERT) {
+        // Tap in ALERT mode → could dismiss or show more info
+        Serial.println("[TOUCH] ALERT tap");
+        // For now, let's make tap do nothing (hold to silence only)
+        // Or: logic.dismissAlert();
     }
 }
 
+// Serial console (unchanged)
+if(Serial.available()) {
+    // ...
+}
+}
 // ── Serial console ──
 if(Serial.available()) {
     String cmd = Serial.readStringUntil('\n');
     cmd.trim();
-        if (cmd.length() > 0) logic.onSerialCommand(cmd);
+    if(cmd.length() > 0)
+        logic.onSerialCommand(cmd);
 }
 }

libraries/KlubhausCore/src/DoorbellLogic.cpp

@@ -258,3 +258,13 @@ void DoorbellLogic::onSerialCommand(const String& cmd) {
     }
     else Serial.println(F("[CMD] alert|silence|reboot|dashboard|off|status"));
 }
+
+void DoorbellLogic::setScreen(ScreenID s) {
+    Serial.printf("[SCREEN] Set to %s\n", screenIdStr(s));
+    _state.screen = s;
+    
+    // Auto-manage backlight based on screen
+    bool needsBacklight = (s != ScreenID::OFF);
+    _display->setBacklight(needsBacklight);
+    _state.backlightOn = needsBacklight;
+}

libraries/KlubhausCore/src/DoorbellLogic.h

@@ -34,6 +34,7 @@ private:
     void flushStatus(const String& message);
     void heartbeat();
     void transition(DeviceState s);
+    void setScreen(ScreenID s);
     String topicUrl(const char* base);
 
     DisplayManager* _display;

vendor/.gitignore

@@ -0,0 +1,2 @@
+*
+!.gitignore