snapshot

libraries/audio-tools/examples/examples-stream/streams-sd_mp3-i2s/README.md

@@ -0,0 +1,28 @@
+# SD Player
+
+We just play a mp3 file (using the Arduino SD library) and output the result via I2S to an external DAC. 
+
+An ESP32 was used to test this sketch.
+
+### External DAC:
+
+![DAC](https://pschatzmann.github.io/Resources/img/dac.jpeg)
+
+
+I am just using the default pins defined by the framework. However I could change them with the help of the config object. The mute pin can be defined in the constructor of the I2SStream - by not defining anything we use the default which is GPIO23
+
+DAC  |	ESP32
+-----|----------------
+VCC  |	5V
+GND  |	GND
+BCK  |	BCK (GPIO14)
+DIN  |	OUT (GPIO22)
+LCK  |	BCK (GPIO15)
+FMT  |	GND
+XMT  |	3V (or another GPIO PIN which is set to high)
+
+- DMP - De-emphasis control for 44.1kHz sampling rate(1): Off (Low) / On (High)
+- FLT - Filter select : Normal latency (Low) / Low latency (High)
+- SCL - System clock input (probably SCL on your board).
+- FMT - Audio format selection : I2S (Low) / Left justified (High)
+- XMT - Soft mute control(1): Soft mute (Low) / soft un-mute (High)