snapshot

libraries/audio-tools/examples/examples-stream/streams-i2s-serial/README.md

@@ -0,0 +1,36 @@
+
+# Stream I2S Input to CSV Output
+
+## General Description:
+
+We implement a I2S source: We stream the sound input which we read in from the I2S interface and displays it on the Arduino Serial Plotter. 
+
+We can use any device which provides the sound data via I2S. In this case it is a 'I2S ADC Audio I2S Capture Card Module'
+Usually you do not need any master clock, but unfortunatly we need to feed this module with a master clock signal from the ESP32, if
+the ESP32 is acting as master.
+
+## Pins
+
+![i2s-adc](https://pschatzmann.github.io/Resources/img/I2S-ADC.jpg)
+
+
+| i2s-ADC  |  ESP32
+| ---------| ---------------
+| MCCLK_IN |  RX_0 (GPIO3)
+| BICK     |  BCK (GPIO14)
+| DATA     |  IN (GPIO32)
+| RLCLK    |  WS (GPIO15)
+| GND      |  GND
+| MUTE     |  -
+| VCC      |  VIN 5V
+
+
+## Additional Comments
+
+I recommend this sketch as a starting point for all I2S input. Just leave the masterclock out, because this is not needed for most input devices.
+If it is working with 32 bit you can try to change it to 16bits which most of the time works as well:
+
+- CsvOutput<int16_t> csvOutput(Serial);
+- cfg.bits_per_sample = 16;
+
+see streams-12s-serial_16_bit