snapshot

libraries/audio-tools/examples/examples-stream/streams-generator-i2s/README.md

@@ -0,0 +1,32 @@
+# I2S Digital Output Test
+
+This is a simple basic test for the I2S output to an external DAC
+
+We just send a generated sine wave and expect to hear a clean signal.
+Please note the log level should be set so that there is no disturbing output!
+
+ 
+### External DAC:
+
+For my tests I am using the 24-bit PCM5102 PCM5102A Stereo DAC Digital-to-analog Converter PLL Voice Module pHAT
+
+![DAC](https://pschatzmann.github.io/Resources/img/dac.jpeg)
+
+I am just using the default pins defined by the framework. However I could change them with the help of the config object. The mute pin can be defined in the constructor of the I2SStream - by not defining anything we use the default which is GPIO23
+
+ 
+DAC  |	ESP32
+-----|----------------
+VCC  |	5V
+GND  |	GND
+BCK  |	BCK (GPIO14)
+DIN  |	OUT (GPIO22)
+LCK  |	BCK (GPIO15)
+FMT  |	GND
+XMT  |	3V (or another GPIO PIN which is set to high)
+
+- DMP - De-emphasis control for 44.1kHz sampling rate(1): Off (Low) / On (High)
+- FLT - Filter select : Normal latency (Low) / Low latency (High)
+- SCL - System clock input (probably SCL on your board).
+- FMT - Audio format selection : I2S (Low) / Left justified (High)
+- XMT - Soft mute control(1): Soft mute (Low) / soft un-mute (High)

libraries/audio-tools/examples/examples-stream/streams-generator-i2s/streams-generator-i2s.ino

@@ -0,0 +1,37 @@
+/**
+ * @file streams-generator-i2s.ino
+ * @author Phil Schatzmann
+ * @brief see https://github.com/pschatzmann/arduino-audio-tools/blob/main/examples/examples-stream/streams-generator-i2s/README.md 
+ * @copyright GPLv3
+ */
+ 
+#include "AudioTools.h"
+
+AudioInfo info(44100, 2, 16);
+SineWaveGenerator<int16_t> sineWave(32000);                // subclass of SoundGenerator with max amplitude of 32000
+GeneratedSoundStream<int16_t> sound(sineWave);             // Stream generated from sine wave
+I2SStream out; 
+StreamCopy copier(out, sound);                             // copies sound into i2s
+
+// Arduino Setup
+void setup(void) {  
+  // Open Serial 
+  Serial.begin(115200);
+  while(!Serial);
+  AudioToolsLogger.begin(Serial, AudioToolsLogLevel::Info);
+
+  // start I2S
+  Serial.println("starting I2S...");
+  auto config = out.defaultConfig(TX_MODE);
+  config.copyFrom(info); 
+  out.begin(config);
+
+  // Setup sine wave
+  sineWave.begin(info, N_B4);
+  Serial.println("started...");
+}
+
+// Arduino loop - copy sound to out 
+void loop() {
+  copier.copy();
+}