snapshot

libraries/audio-tools/examples/examples-communication/serial/send-8bit-receive/send-8bit-receive.ino

@@ -0,0 +1,59 @@
+/**
+ * @file send-8bit-receive.ino
+ * @author Phil Schatzmann
+ * @brief Sending and receiving audio via Serial. You need to connect the RX pin
+ * with the TX pin!
+ * 
+ * We send 8bit data over the wire, so any (small) data loss will not be audible
+ *
+ * @version 0.1
+ * @date 2023-11-25
+ *
+ * @copyright Copyright (c) 2022
+ */
+
+#include "AudioTools.h"
+// #include "AudioTools/AudioLibs/AudioBoardStream.h"
+
+AudioInfo info(44100, 2, 16);
+I2SStream out; // or AnalogAudioStream, AudioBoardStream etc
+SineWaveGenerator<int16_t> sineWave(32000);
+GeneratedSoundStream<int16_t> sound(sineWave);
+auto &serial = Serial2;
+EncoderL8 enc;
+DecoderL8 dec;
+EncodedAudioStream enc_stream(&serial, &enc);
+EncodedAudioStream dec_stream(&out, &dec);
+Throttle throttle(enc_stream);
+StreamCopy copierOut(throttle, sound, 256);  // copies sound into Serial
+StreamCopy copierIn(dec_stream, serial, 256);     // copies sound from Serial
+
+void setup() {
+  Serial.begin(115200);
+  AudioToolsLogger.begin(Serial, AudioToolsLogLevel::Warning);
+
+  // Note the format for setting a serial port is as follows:
+  // Serial.begin(baud-rate, protocol, RX pin, TX pin);
+  Serial2.begin(3000000, SERIAL_8N1);
+
+  sineWave.begin(info, N_B4);
+  throttle.begin(info);
+  enc_stream.begin(info);
+  dec_stream.begin(info);
+
+  // start I2S
+  auto config = out.defaultConfig(TX_MODE);
+  config.copyFrom(info);
+  out.begin(config);
+
+  // better visibility in logging
+  copierOut.setLogName("out");
+  copierIn.setLogName("in");
+}
+
+void loop() {
+  // copy to serial
+  copierOut.copy();
+  // copy from serial
+  copierIn.copy();
+}