Fix onboard audio: apply ALSA UCM HiFi verb before Pd start

- Add alsaucm -c hw:0 set _verb HiFi to start-synth.sh (onboard mode)
- Add UCM verb to install.sh
- Add UCM verb to justfile fix-ucm recipe
- Without this, the DSP audio routing is not configured and no sound
  reaches the headphone output

install.sh

@@ -9,10 +9,29 @@ for svc in "${SERVICES[@]}"; do
     sudo cp "$REPO/system/$svc.service" /etc/systemd/system/
 done
 
+# Apply UCM HiFi verb to configure DSP audio routing
+if command -v alsaucm &>/dev/null; then
+    alsaucm -c hw:0 set _verb HiFi && echo "[OK] UCM HiFi verb applied"
+fi
+
 # Fix UCM bug (must survive OS updates)
 FILE=/usr/share/alsa/ucm2/codecs/qcom-lpass/rx-macro/HeadphoneEnableSeq.conf
+NEED_FIX=0
+# Remove invalid RX HPH Mode line
 if grep -q "RX HPH Mode" "$FILE" 2>/dev/null; then
     sudo sed -i '/RX HPH Mode/d' "$FILE"
+    NEED_FIX=1
+fi
+# Add missing RX INT0_1/INT1_1 INTERP controls (blocks audio on some boards)
+if ! grep -q "RX INT0_1 INTERP" "$FILE" 2>/dev/null; then
+    echo '    cset "name=RX INT0_1 INTERP" "RX INT0_1 MIX1"' | sudo tee -a "$FILE" >/dev/null
+    NEED_FIX=1
+fi
+if ! grep -q "RX INT1_1 INTERP" "$FILE" 2>/dev/null; then
+    echo '    cset "name=RX INT1_1 INTERP" "RX INT1_1 MIX1"' | sudo tee -a "$FILE" >/dev/null
+    NEED_FIX=1
+fi
+if [ "$NEED_FIX" = "1" ]; then
     echo "[OK] UCM HeadphoneEnableSeq patched"
 fi
 

justfile

@@ -149,8 +149,24 @@ reboot:
 # Must run once after OS updates or first install.
 fix-ucm:
     @ssh {{SSH_OPTS}} "{{BOARD_USER}}@{{BOARD_HOST}}" "\
-        if grep -q 'RX HPH Mode' /usr/share/alsa/ucm2/codecs/qcom-lpass/rx-macro/HeadphoneEnableSeq.conf 2>/dev/null; then \
-            echo '{{BOARD_PASS}}' | sudo -S sed -i '/RX HPH Mode/d' /usr/share/alsa/ucm2/codecs/qcom-lpass/rx-macro/HeadphoneEnableSeq.conf && \
+        echo '{{BOARD_PASS}}' | sudo -S alsaucm -c hw:0 set _verb HiFi 2>/dev/null && \
+        echo '[OK] UCM verb applied' || \
+        echo '[WARN] UCM verb failed' && \
+        FILE=/usr/share/alsa/ucm2/codecs/qcom-lpass/rx-macro/HeadphoneEnableSeq.conf && \
+        FIXED=0 && \
+        if grep -q 'RX HPH Mode' \"\$FILE\" 2>/dev/null; then \
+            echo '{{BOARD_PASS}}' | sudo -S sed -i '/RX HPH Mode/d' \"\$FILE\" && \
+            FIXED=1; \
+        fi && \
+        if ! grep -q 'RX INT0_1 INTERP' \"\$FILE\" 2>/dev/null; then \
+            echo '    cset \"name=RX INT0_1 INTERP\" \"RX INT0_1 MIX1\"' | sudo tee -a \"\$FILE\" >/dev/null && \
+            FIXED=1; \
+        fi && \
+        if ! grep -q 'RX INT1_1 INTERP' \"\$FILE\" 2>/dev/null; then \
+            echo '    cset \"name=RX INT1_1 INTERP\" \"RX INT1_1 MIX1\"' | sudo tee -a \"\$FILE\" >/dev/null && \
+            FIXED=1; \
+        fi && \
+        if [ \"\$FIXED\" = \"1\" ]; then \
             sudo systemctl restart wireplumber && \
             echo '[OK] UCM HeadphoneEnableSeq patched'; \
         else \

scripts/start-synth.sh

@@ -64,6 +64,14 @@ fi
 if [ "$MODE" = "onboard" ] || [ "$MODE" = "i2s" ]; then
     info "Mode: Onboard audio (PMIC headphone / line out on JMISC)"
     AUDIO_OPTS=(-audiooutdev 0 -inchannels 0 -outchannels 1)
+    # Apply ALSA UCM HiFi verb to configure DSP routing (required for audio)
+    if command -v alsaucm &>/dev/null; then
+        alsaucm -c hw:0 set _verb HiFi 2>/dev/null && \
+            info "  UCM HiFi verb applied" || \
+            info "  UCM HiFi verb failed"
+    else
+        info "  alsaucm not found — skipping UCM config"
+    fi
 fi
 
 if [ "$MODE" = "loopback" ]; then