You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
19145704e4
|
3 years ago | |
|---|---|---|
| .. | ||
| 4x6_right | 3 years ago | |
| 5x6_right | 3 years ago | |
| config.h | 3 years ago | |
| info.json | 3 years ago | |
| post_config.h | ||
| readme.md | ||
| tractyl_manuform.c | 3 years ago | |
| tractyl_manuform.h | ||
readme.md
Tractyl Manuform (4x6, 5x6)
the Dactyl-Manuform is a split curved keyboard based on the design of adereth dactyl and thumb cluster design of the manuform keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
- Keyboard Maintainer: drashna
- Hardware Supported: Teensy 2.0++, WeAct BlackPill F411
Make example for this keyboard (after setting up your build environment):
make handwired/tractyl_manuform/5x6_right/f411/drashna:default
Flashing example for this keyboard:
make handwired/tractyl_manuform/5x6_right/f411/drashna:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
QK_BOOTif it is available