You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
81ca83296f
The `adc_read()` code for STM32F0xx expects to get the 0-based channel number in `mux.input`, but the `pinToMux()` code for STM32F0xx was attempting to pass the CHSELR bit mask in that field, which resulted in selecting a wrong channel, therefore `analogReadPin()` did not work properly for the STM32F0xx chips. Fix `pinToMux()` to put the channel number in that field (this matches the behavior for other supported chips and also allows selection of channels 16...18, which can be used to access the builtin temperature, reference voltage and VBAT sensors). |
3 years ago | |
|---|---|---|
| .. | ||
| eeprom | 3 years ago | |
| flash | 3 years ago | |
| ps2 | ||
| vendor/RP/RP2040 | 3 years ago | |
| wear_leveling | 3 years ago | |
| analog.c | 3 years ago | |
| analog.h | ||
| audio_dac.h | ||
| audio_dac_additive.c | 3 years ago | |
| audio_dac_basic.c | 3 years ago | |
| audio_pwm.h | ||
| audio_pwm_hardware.c | 3 years ago | |
| audio_pwm_software.c | ||
| i2c_master.c | 3 years ago | |
| i2c_master.h | ||
| serial.c | 3 years ago | |
| serial_protocol.c | 3 years ago | |
| serial_protocol.h | 4 years ago | |
| serial_usart.c | 3 years ago | |
| serial_usart.h | 4 years ago | |
| spi_master.c | 3 years ago | |
| spi_master.h | ||
| uart.c | 3 years ago | |
| uart.h | 3 years ago | |
| usbpd_stm32g4.c | ||
| ws2812.c | 3 years ago | |
| ws2812_pwm.c | 3 years ago | |
| ws2812_spi.c | 3 years ago | |