You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
7e0299117b
Co-authored-by: Nick Brassel <nick@tzarc.org> |
3 years ago | |
|---|---|---|
| .. | ||
| keymaps/default | ||
| 10_helix_r.c | ||
| 10_helix_r.h | ||
| config.h | 3 years ago | |
| info.json | 3 years ago | |
| readme.md | ||
| rules.mk | 3 years ago | |
readme.md
navpad 1.0 with Helix (Right hand side)
Navpad connected with helix keyboard (Right Side)
- Keyboard Maintainer: yushakobo
- Hardware Supported: Navpad 1.0 PCB and Helix PCB, Pro Micro
- Hardware Availability: https://shop.yushakobo.jp/products/navpad-10
Make example for this keyboard (after setting up your build environment):
make yushakobo/navpad/10_helix_r:default
Flashing examples for this keyboard...
Helix side:
make yushakobo/navpad/10_helix_r:default:avrdude-split-right
Navpad side:
make yushakobo/navpad/10_helix_r:default:avrdude-split-left
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
QK_BOOTif it is available